This is the latest recevied telemetry packets stored in our database for station/object 2E0ONV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1734842688 | 10 | 49.6 F | 3.52 V | 40 M | 0 |
| 1734839689 | 9 | 50 F | 3.59 V | 40 M | 0 |
| 1734836841 | 10 | 50.9 F | 3.63 V | 30 M | 0 |
| 1734833839 | 8 | 51 F | 3.65 V | 50 M | 0 |
| 1734830839 | 10 | 51.4 F | 3.65 V | 20 M | 0 |
| 1734827839 | 9 | 51.8 F | 3.66 V | 30 M | 0 |
| 1734824837 | 12 | 52.8 F | 3.66 V | 20 M | 0 |
| 1734821826 | 12 | 53.2 F | 3.67 V | 20 M | 0 |
| 1734819103 | 12 | 53.7 F | 3.68 V | 10 M | 0 |
| 1734816093 | 12 | 54.8 F | 3.69 V | 20 M | 0 |
| 1734813082 | 12 | 55.7 F | 3.7 V | 20 M | 0 |
| 1734810124 | 11 | 56.3 F | 3.71 V | 0 M | 0 |
| 1734807117 | 12 | 56.4 F | 3.72 V | 40 M | 0 |
| 1734804332 | 9 | 56.8 F | 3.71 V | 20 M | 0 |
| 1734801326 | 9 | 57.3 F | 3.73 V | 30 M | 0 |
| 1734798315 | 9 | 58.4 F | 3.73 V | 30 M | 0 |
| 1734795302 | 11 | 60 F | 3.73 V | 10 M | 0 |
| 1734792284 | 12 | 61.5 F | 3.74 V | 20 M | 0 |
| 1734789332 | 9 | 61.7 F | 3.75 V | 20 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)