This is the latest recevied telemetry packets stored in our database for station/object 2E1GRY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734891976 | 4 | 735 | 398 | 9 | 0 |
| 1734891717 | 5 | 734 | 393 | 9 | 0 |
| 1734891417 | 6 | 734 | 394 | 8 | 0 |
| 1734891116 | 6 | 734 | 394 | 9 | 0 |
| 1734890817 | 4 | 734 | 395 | 8 | 0 |
| 1734890517 | 7 | 735 | 396 | 9 | 0 |
| 1734890217 | 6 | 734 | 395 | 7 | 0 |
| 1734889917 | 7 | 735 | 396 | 8 | 0 |
| 1734889769 | 8 | 735 | 395 | 10 | 0 |
| 1734889468 | 8 | 735 | 396 | 7 | 0 |
| 1734889168 | 7 | 735 | 397 | 9 | 0 |
| 1734888869 | 8 | 735 | 397 | 8 | 0 |
| 1734888569 | 7 | 735 | 397 | 8 | 0 |
| 1734888269 | 7 | 736 | 398 | 7 | 0 |
| 1734887969 | 8 | 736 | 399 | 9 | 0 |
| 1734887669 | 8 | 736 | 399 | 9 | 0 |
| 1734887369 | 6 | 737 | 398 | 9 | 0 |
| 1734887069 | 7 | 737 | 400 | 8 | 0 |
| 1734886769 | 8 | 738 | 400 | 8 | 0 |
| 1734886468 | 6 | 738 | 401 | 8 | 0 |
| 1734886169 | 7 | 738 | 400 | 8 | 0 |
| 1734885868 | 7 | 739 | 401 | 9 | 0 |
| 1734885569 | 7 | 740 | 402 | 8 | 0 |
| 1734885269 | 8 | 740 | 403 | 9 | 0 |
| 1734884969 | 6 | 742 | 403 | 9 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)