This is the latest recevied telemetry packets stored in our database for station/object VK5EU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734922982 | 467 | 648 | 0 | 0 | 0 |
| 1734922862 | 467 | 647 | 0 | 0 | 0 |
| 1734922743 | 469 | 647 | 0 | 0 | 0 |
| 1734922623 | 469 | 647 | 0 | 0 | 0 |
| 1734922503 | 470 | 646 | 0 | 0 | 0 |
| 1734922383 | 469 | 645 | 0 | 0 | 0 |
| 1734922263 | 469 | 643 | 0 | 0 | 0 |
| 1734922146 | 469 | 641 | 0 | 0 | 0 |
| 1734921419 | 467 | 639 | 0 | 0 | 0 |
| 1734921298 | 465 | 637 | 0 | 0 | 0 |
| 1734920164 | 467 | 638 | 0 | 0 | 0 |
| 1734920045 | 468 | 634 | 0 | 0 | 0 |
| 1734918602 | 437 | 639 | 0 | 0 | 0 |
| 1734918485 | 465 | 638 | 0 | 0 | 0 |
| 1734918365 | 469 | 636 | 0 | 0 | 0 |
| 1734918004 | 476 | 626 | 0 | 0 | 0 |
| 1734887423 | 459 | 615 | 0 | 0 | 0 |
| 1734887305 | 451 | 613 | 0 | 0 | 0 |
| 1734887189 | 458 | 612 | 0 | 0 | 0 |
| 1734887066 | 451 | 611 | 0 | 0 | 0 |
| 1734886945 | 466 | 610 | 0 | 0 | 0 |
| 1734886708 | 452 | 606 | 0 | 0 | 0 |
| 1734886348 | 472 | 599 | 0 | 0 | 0 |
| 1734886229 | 474 | 596 | 0 | 0 | 0 |
| 1734886109 | 477 | 590 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)