This is the latest recevied telemetry packets stored in our database for station/object W6SRR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1734899805 | 1354 | 71.6 | 29.5 | 61.2 | 0 |
| 1734898903 | 1354 | 71.6 | 29.5 | 61.1 | 0 |
| 1734898005 | 1354 | 71.5 | 28.9 | 60.9 | 0 |
| 1734897104 | 1354 | 71.4 | 28.9 | 60.8 | 0 |
| 1734896211 | 1354 | 71.2 | 28.4 | 60.8 | 0 |
| 1734895303 | 1356 | 71.2 | 28.9 | 60.5 | 0 |
| 1734894405 | 1354 | 71 | 28.9 | 60.5 | 0 |
| 1734893503 | 1354 | 71 | 28.9 | 60.4 | 0 |
| 1734892605 | 1356 | 70.9 | 28.9 | 60.2 | 0 |
| 1734891702 | 1354 | 70.9 | 28.9 | 60.2 | 0 |
| 1734890806 | 1358 | 70.9 | 28.4 | 60.2 | 0 |
| 1734889904 | 1354 | 70.8 | 28.9 | 60.2 | 0 |
| 1734889006 | 1354 | 70.8 | 28.9 | 60.2 | 0 |
| 1734888103 | 1353 | 70.9 | 28.9 | 60.1 | 0 |
| 1734887204 | 1342 | 70.8 | 28.4 | 60 | 0 |
| 1734886304 | 1353 | 70.8 | 28.9 | 60.1 | 0 |
| 1734885406 | 1354 | 70.8 | 28.9 | 60 | 0 |
| 1734884503 | 1354 | 70.9 | 28.9 | 60.1 | 0 |
| 1734883605 | 1356 | 70.9 | 28.9 | 60.1 | 0 |
| 1734882704 | 1354 | 70.8 | 28.9 | 60.1 | 0 |
| 1734881805 | 1354 | 70.8 | 28.9 | 60 | 0 |
| 1734880903 | 1351 | 70.8 | 28.4 | 60.1 | 0 |
| 1734880005 | 1354 | 70.8 | 28.4 | 60 | 0 |
| 1734879104 | 1356 | 70.8 | 28.9 | 60 | 0 |
| 1734878206 | 1354 | 70.9 | 28.9 | 60 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)