This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1734888695 | 3.87 V | 1.41 V | 104 mW | 27 degC | 98387.5 Pa |
| 1734886880 | 3.96 V | 1.43 V | 110 mW | 27.2 degC | 98387.5 Pa |
| 1734885039 | 3.96 V | 1.43 V | 104 mW | 27 degC | 98387.5 Pa |
| 1734883224 | 3.96 V | 1.43 V | 92 mW | 27.3 degC | 98412.5 Pa |
| 1734881389 | 3.96 V | 1.43 V | 90 mW | 27.2 degC | 98450 Pa |
| 1734879574 | 3.96 V | 1.43 V | 94 mW | 27.2 degC | 98487.5 Pa |
| 1734877743 | 3.82 V | 1.4 V | 146 mW | 27.2 degC | 98537.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)