This is the latest recevied telemetry packets stored in our database for station/object KD7OUT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734914665 | 461 | 595 | 0 | 0 | 0 |
| 1734914546 | 464 | 594 | 0 | 0 | 0 |
| 1734914426 | 466 | 593 | 0 | 0 | 0 |
| 1734914187 | 463 | 590 | 0 | 0 | 0 |
| 1734913948 | 447 | 587 | 0 | 0 | 0 |
| 1734913709 | 464 | 581 | 0 | 0 | 0 |
| 1734905873 | 378 | 594 | 0 | 0 | 0 |
| 1734905515 | 379 | 593 | 0 | 0 | 0 |
| 1734905395 | 381 | 593 | 0 | 0 | 0 |
| 1734905156 | 390 | 592 | 0 | 0 | 0 |
| 1734905036 | 391 | 592 | 0 | 0 | 0 |
| 1734904589 | 476 | 587 | 0 | 0 | 0 |
| 1734904078 | 374 | 586 | 0 | 0 | 0 |
| 1734903838 | 375 | 581 | 0 | 0 | 0 |
| 1734900355 | 481 | 586 | 0 | 0 | 0 |
| 1734900236 | 479 | 585 | 0 | 0 | 0 |
| 1734900116 | 482 | 583 | 0 | 0 | 0 |
| 1734899997 | 481 | 581 | 0 | 0 | 0 |
| 1734899876 | 481 | 579 | 0 | 0 | 0 |
| 1734899757 | 482 | 577 | 0 | 0 | 0 |
| 1734899638 | 481 | 572 | 0 | 0 | 0 |
| 1734899518 | 480 | 569 | 0 | 0 | 0 |
| 1734834608 | 469 | 587 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)