This is the latest recevied telemetry packets stored in our database for station/object VK4VH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734938133 | 443 | 633 | 0 | 0 | 0 |
| 1734938092 | 406 | 632 | 0 | 0 | 0 |
| 1734938087 | 415 | 632 | 0 | 0 | 0 |
| 1734937992 | 406 | 629 | 0 | 0 | 0 |
| 1734937874 | 442 | 625 | 0 | 0 | 0 |
| 1734934139 | 472 | 638 | 0 | 0 | 0 |
| 1734934121 | 415 | 638 | 0 | 0 | 0 |
| 1734933921 | 410 | 635 | 0 | 0 | 0 |
| 1734933897 | 413 | 634 | 0 | 0 | 0 |
| 1734933780 | 426 | 630 | 0 | 0 | 0 |
| 1734933770 | 464 | 630 | 0 | 0 | 0 |
| 1734932557 | 423 | 629 | 0 | 0 | 0 |
| 1734932046 | 427 | 635 | 0 | 0 | 0 |
| 1734931421 | 441 | 639 | 0 | 0 | 0 |
| 1734931363 | 411 | 639 | 0 | 0 | 0 |
| 1734931287 | 445 | 639 | 0 | 0 | 0 |
| 1734931107 | 409 | 639 | 0 | 0 | 0 |
| 1734931094 | 408 | 638 | 0 | 0 | 0 |
| 1734930965 | 407 | 638 | 0 | 0 | 0 |
| 1734930438 | 446 | 631 | 0 | 0 | 0 |
| 1734928443 | 409 | 639 | 0 | 0 | 0 |
| 1734928420 | 407 | 639 | 0 | 0 | 0 |
| 1734927903 | 446 | 639 | 0 | 0 | 0 |
| 1734924579 | 459 | 643 | 0 | 0 | 0 |
| 1734924353 | 459 | 643 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)