This is the latest recevied telemetry packets stored in our database for station/object VA6COM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734912679 | 413 | 623 | 0 | 0 | 0 |
| 1734912659 | 427 | 623 | 0 | 0 | 0 |
| 1734912619 | 425 | 623 | 0 | 0 | 0 |
| 1734912559 | 412 | 623 | 0 | 0 | 0 |
| 1734912500 | 425 | 622 | 0 | 0 | 0 |
| 1734912460 | 422 | 621 | 0 | 0 | 0 |
| 1734912440 | 424 | 622 | 0 | 0 | 0 |
| 1734912420 | 413 | 622 | 0 | 0 | 0 |
| 1734912401 | 426 | 622 | 0 | 0 | 0 |
| 1734912381 | 425 | 622 | 0 | 0 | 0 |
| 1734912361 | 410 | 622 | 0 | 0 | 0 |
| 1734912341 | 427 | 621 | 0 | 0 | 0 |
| 1734912321 | 423 | 621 | 0 | 0 | 0 |
| 1734912301 | 423 | 622 | 0 | 0 | 0 |
| 1734912083 | 428 | 621 | 0 | 0 | 0 |
| 1734911984 | 415 | 620 | 0 | 0 | 0 |
| 1734911964 | 426 | 620 | 0 | 0 | 0 |
| 1734911905 | 414 | 620 | 0 | 0 | 0 |
| 1734911885 | 415 | 620 | 0 | 0 | 0 |
| 1734911865 | 424 | 620 | 0 | 0 | 0 |
| 1734911845 | 414 | 620 | 0 | 0 | 0 |
| 1734911825 | 425 | 620 | 0 | 0 | 0 |
| 1734911806 | 424 | 620 | 0 | 0 | 0 |
| 1734911726 | 414 | 620 | 0 | 0 | 0 |
| 1734911686 | 416 | 619 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)