This is the latest recevied telemetry packets stored in our database for station/object ZL3RDK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1734924664 | 8 | 39.8 C | 3.84 V | 20 M | 0 |
| 1734924465 | 8 | 41.1 C | 3.83 V | 60 M | 0 |
| 1734924338 | 8 | 42 C | 3.83 V | 40 M | 0 |
| 1734924284 | 9 | 41 C | 3.82 V | 80 M | 0 |
| 1734924155 | 8 | 41.2 C | 3.83 V | 30 M | 0 |
| 1734924022 | 9 | 40.6 C | 3.83 V | 40 M | 0 |
| 1734923161 | 8 | 43.4 C | 3.79 V | 290 M | 0 |
| 1734923128 | 7 | 42.3 C | 3.78 V | 330 M | 0 |
| 1734923063 | 9 | 42.6 C | 3.79 V | 360 M | 0 |
| 1734922594 | 9 | 40.1 C | 3.78 V | 110 M | 0 |
| 1734921248 | 8 | 40.1 C | 3.73 V | 200 M | 0 |
| 1734920374 | 8 | 40.5 C | 3.71 V | 340 M | 0 |
| 1734918377 | 7 | 41.5 C | 3.67 V | 310 M | 0 |
| 1734918268 | 6 | 41.4 C | 3.66 V | 330 M | 0 |
| 1734917101 | 9 | 43.8 C | 3.64 V | 20 M | 0 |
| 1734916609 | 7 | 44.7 C | 3.6 V | 10 M | 0 |
| 1734907620 | 9 | 43.2 C | 3.64 V | 0 M | 0 |
| 1734907468 | 10 | 43.5 C | 3.63 V | 0 M | 0 |
| 1734906912 | 10 | 42.3 C | 3.59 V | 0 M | 0 |
| 1734905809 | 10 | 39.8 C | 3.52 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)