This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734897091 | 1365 | 719 | 392 | 199 | 0 |
| 1734896190 | 1370 | 718 | 392 | 198 | 0 |
| 1734895290 | 1370 | 717 | 392 | 197 | 0 |
| 1734895111 | 1380 | 717 | 392 | 196 | 0 |
| 1734894391 | 1366 | 718 | 397 | 195 | 0 |
| 1734893490 | 1375 | 717 | 397 | 194 | 0 |
| 1734892590 | 1370 | 718 | 392 | 193 | 0 |
| 1734891690 | 1370 | 718 | 392 | 192 | 0 |
| 1734891510 | 1370 | 718 | 392 | 191 | 0 |
| 1734890790 | 1370 | 718 | 392 | 190 | 0 |
| 1734889890 | 1370 | 716 | 386 | 189 | 0 |
| 1734888991 | 1370 | 716 | 386 | 188 | 0 |
| 1734887910 | 1373 | 715 | 386 | 186 | 0 |
| 1734887191 | 1370 | 713 | 386 | 185 | 0 |
| 1734886290 | 1370 | 712 | 392 | 184 | 0 |
| 1734885391 | 1368 | 710 | 386 | 183 | 0 |
| 1734884490 | 1370 | 712 | 386 | 182 | 0 |
| 1734884310 | 1370 | 712 | 386 | 181 | 0 |
| 1734883590 | 1370 | 713 | 386 | 180 | 0 |
| 1734882691 | 1370 | 713 | 386 | 179 | 0 |
| 1734881790 | 1370 | 714 | 386 | 178 | 0 |
| 1734880889 | 1366 | 714 | 386 | 177 | 0 |
| 1734880710 | 1370 | 714 | 392 | 176 | 0 |
| 1734879990 | 1370 | 715 | 386 | 175 | 0 |
| 1734879092 | 1370 | 716 | 392 | 174 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)