This is the latest recevied telemetry packets stored in our database for station/object OM7AMO-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736395025 | 418 | 0 | 0 | 0 | 0 |
| 1736394125 | 419 | 0 | 0 | 0 | 0 |
| 1736393225 | 423 | 0 | 0 | 0 | 0 |
| 1736392325 | 417 | 0 | 0 | 0 | 0 |
| 1736391425 | 421 | 0 | 0 | 0 | 0 |
| 1736390525 | 425 | 0 | 0 | 0 | 0 |
| 1736389625 | 421 | 0 | 0 | 0 | 0 |
| 1736388725 | 414 | 0 | 0 | 0 | 0 |
| 1736387824 | 412 | 0 | 0 | 0 | 0 |
| 1736386924 | 421 | 0 | 0 | 0 | 0 |
| 1736386024 | 426 | 0 | 0 | 0 | 0 |
| 1736385124 | 418 | 0 | 0 | 0 | 0 |
| 1736384224 | 419 | 0 | 0 | 0 | 0 |
| 1736383324 | 414 | 0 | 0 | 0 | 0 |
| 1736382424 | 413 | 0 | 0 | 0 | 0 |
| 1736381524 | 429 | 0 | 0 | 0 | 0 |
| 1736380624 | 413 | 0 | 0 | 0 | 0 |
| 1736379724 | 414 | 0 | 0 | 0 | 0 |
| 1736378824 | 426 | 0 | 0 | 0 | 0 |
| 1736377924 | 419 | 0 | 0 | 0 | 0 |
| 1736377024 | 424 | 0 | 0 | 0 | 0 |
| 1736376124 | 425 | 0 | 0 | 0 | 0 |
| 1736375224 | 413 | 0 | 0 | 0 | 0 |
| 1736374323 | 414 | 0 | 0 | 0 | 0 |
| 1736373424 | 420 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)