This is the latest recevied telemetry packets stored in our database for station/object SP6RVW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734855434 | 4.16 VDC | 4.64 VDC | 0 | 0 | 0 |
| 1734853634 | 4.16 VDC | 4.76 VDC | 0 | 0 | 0 |
| 1734851834 | 4.16 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1734850034 | 4.16 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1734848234 | 4.16 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1734846434 | 4.17 VDC | 4.86 VDC | 0 | 0 | 0 |
| 1734844634 | 4.17 VDC | 4.68 VDC | 0 | 0 | 0 |
| 1734842834 | 4.16 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1734841033 | 4.17 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1734839233 | 4.17 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1734837433 | 4.16 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1734835633 | 4.17 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1734833833 | 4.17 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1734832033 | 4.16 VDC | 4.62 VDC | 0 | 0 | 0 |
| 1734830235 | 4.16 VDC | 5.04 VDC | 0 | 0 | 0 |
| 1734828434 | 4.16 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1734826634 | 4.17 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1734824834 | 4.17 VDC | 4.76 VDC | 0 | 0 | 0 |
| 1734823034 | 4.17 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1734821234 | 4.17 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1734819434 | 4.17 VDC | 4.64 VDC | 0 | 0 | 0 |
| 1734817634 | 4.17 VDC | 4.64 VDC | 0 | 0 | 0 |
| 1734815833 | 4.16 VDC | 4.58 VDC | 0 | 0 | 0 |
| 1734814034 | 4.17 VDC | 4.68 VDC | 0 | 0 | 0 |
| 1734812233 | 4.16 VDC | 4.96 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)