This is the latest recevied telemetry packets stored in our database for station/object SP1WSX-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734906238 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1734904436 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1734904427 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1734899603 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1734897801 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1734895999 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1734892395 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1734890593 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1734888791 | 4.85 VDC | 0 | 0 | 0 | 0 |
| 1734886989 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1734886985 | 4.84 VDC | 0 | 0 | 0 | 0 |
| 1734886619 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1734886613 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1734885308 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1734883506 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1734882934 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1734881132 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1734880475 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1734878263 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1734876461 | 4.41 VDC | 0 | 0 | 0 | 0 |
| 1734874659 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1734872857 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1734871224 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1734869422 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1734867051 | 4.48 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)