This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734877397 | 9 | 128 | 1016 | 1146 | 0 |
| 1734874384 | 9 | 129 | 1016 | 1146 | 0 |
| 1734871316 | 6 | 137 | 1016 | 1146 | 0 |
| 1734868288 | 9 | 138 | 1017 | 1149 | 0 |
| 1734865250 | 8 | 139 | 1017 | 1149 | 0 |
| 1734862222 | 9 | 146 | 1017 | 1146 | 0 |
| 1734859210 | 9 | 139 | 1016 | 1146 | 0 |
| 1734856123 | 9 | 144 | 1016 | 1149 | 0 |
| 1734853096 | 11 | 149 | 1016 | 1146 | 0 |
| 1734850079 | 8 | 157 | 1017 | 1146 | 0 |
| 1734847053 | 9 | 193 | 1017 | 1146 | 0 |
| 1734844041 | 9 | 275 | 1018 | 1149 | 0 |
| 1734841032 | 9 | 259 | 1018 | 1146 | 0 |
| 1734838020 | 8 | 232 | 1019 | 1149 | 0 |
| 1734835000 | 9 | 164 | 1020 | 1146 | 0 |
| 1734831966 | 7 | 114 | 1020 | 1146 | 0 |
| 1734830513 | 8 | 107 | 1020 | 1149 | 0 |
| 1734827446 | 8 | 93 | 1020 | 1149 | 0 |
| 1734824370 | 10 | 92 | 1020 | 1146 | 0 |
| 1734821343 | 5 | 91 | 1019 | 1149 | 0 |
| 1734818336 | 7 | 87 | 1019 | 1146 | 0 |
| 1734815323 | 8 | 87 | 1019 | 1149 | 0 |
| 1734812313 | 9 | 90 | 1019 | 1149 | 0 |
| 1734809303 | 8 | 91 | 1019 | 1149 | 0 |
| 1734806294 | 9 | 95 | 1019 | 1146 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)