This is the latest recevied telemetry packets stored in our database for station/object UB1ATP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736447157 | 2.97 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1736446256 | 3.18 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1736445356 | 3.29 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1736444456 | 3.34 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1736443558 | 3.38 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1736442699 | 3.39 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1736441799 | 3.42 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1736440899 | 3.44 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1736433673 | 3.72 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736432773 | 3.74 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736431872 | 3.75 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736430973 | 3.74 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736430071 | 3.76 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736427370 | 3.81 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736426470 | 3.84 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736423770 | 3.86 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736422867 | 3.88 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736421967 | 3.89 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736421782 | 3.89 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736420876 | 3.91 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736419976 | 3.92 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736419076 | 3.93 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736418176 | 3.94 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736417275 | 3.95 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1736416375 | 3.97 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)