This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734893433 | 123 | 46 | 32 | 0 | 0 |
| 1734889833 | 123 | 47 | 43 | 0 | 0 |
| 1734886233 | 123 | 49 | 46 | 0 | 0 |
| 1734882633 | 123 | 50 | 32 | 0 | 0 |
| 1734879032 | 124 | 50 | 44 | 0 | 0 |
| 1734875433 | 124 | 51 | 36 | 0 | 0 |
| 1734871833 | 125 | 52 | 41 | 0 | 0 |
| 1734868233 | 125 | 54 | 31 | 0 | 0 |
| 1734864633 | 125 | 56 | 37 | 0 | 0 |
| 1734861033 | 127 | 58 | 34 | 0 | 0 |
| 1734857433 | 127 | 63 | 30 | 0 | 0 |
| 1734853832 | 129 | 65 | 34 | 0 | 0 |
| 1734850233 | 129 | 69 | 31 | 0 | 0 |
| 1734846632 | 131 | 71 | 27 | 0 | 0 |
| 1734843032 | 142 | 71 | 35 | 0 | 0 |
| 1734839432 | 139 | 70 | 25 | 0 | 0 |
| 1734835833 | 140 | 68 | 32 | 0 | 0 |
| 1734832232 | 140 | 66 | 32 | 0 | 0 |
| 1734828632 | 140 | 63 | 38 | 0 | 0 |
| 1734825032 | 139 | 61 | 29 | 0 | 0 |
| 1734821432 | 138 | 58 | 34 | 0 | 0 |
| 1734817832 | 133 | 55 | 29 | 0 | 0 |
| 1734814232 | 131 | 51 | 26 | 0 | 0 |
| 1734810632 | 124 | 49 | 9 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)