This is the latest recevied telemetry packets stored in our database for station/object HJ5JMS-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734867036 | 315 | 0 | 0 | 0 | 0 |
| 1734865234 | 321 | 0 | 0 | 0 | 0 |
| 1734863434 | 327 | 0 | 0 | 0 | 0 |
| 1734861633 | 331 | 0 | 0 | 0 | 0 |
| 1734859833 | 335 | 0 | 0 | 0 | 0 |
| 1734858032 | 339 | 0 | 0 | 0 | 0 |
| 1734856232 | 341 | 0 | 0 | 0 | 0 |
| 1734854432 | 344 | 0 | 0 | 0 | 0 |
| 1734852631 | 345 | 0 | 0 | 0 | 0 |
| 1734850831 | 347 | 0 | 0 | 0 | 0 |
| 1734849030 | 348 | 0 | 0 | 0 | 0 |
| 1734847230 | 348 | 0 | 0 | 0 | 0 |
| 1734845429 | 349 | 0 | 0 | 0 | 0 |
| 1734843629 | 349 | 0 | 0 | 0 | 0 |
| 1734841829 | 349 | 0 | 0 | 0 | 0 |
| 1734840028 | 350 | 0 | 0 | 0 | 0 |
| 1734838227 | 350 | 0 | 0 | 0 | 0 |
| 1734836427 | 350 | 0 | 0 | 0 | 0 |
| 1734832826 | 351 | 0 | 0 | 0 | 0 |
| 1734829225 | 352 | 0 | 0 | 0 | 0 |
| 1734827424 | 352 | 0 | 0 | 0 | 0 |
| 1734825624 | 353 | 0 | 0 | 0 | 0 |
| 1734823824 | 353 | 0 | 0 | 0 | 0 |
| 1734822024 | 354 | 0 | 0 | 0 | 0 |
| 1734820223 | 356 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)