This is the latest recevied telemetry packets stored in our database for station/object VA3RHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734879235 | 402 | 537 | 0 | 0 | 0 |
| 1734877443 | 402 | 536 | 0 | 0 | 0 |
| 1734875652 | 402 | 536 | 0 | 0 | 0 |
| 1734873862 | 402 | 536 | 0 | 0 | 0 |
| 1734872070 | 402 | 535 | 0 | 0 | 0 |
| 1734870279 | 402 | 535 | 0 | 0 | 0 |
| 1734866696 | 403 | 536 | 0 | 0 | 0 |
| 1734864904 | 403 | 536 | 0 | 0 | 0 |
| 1734863113 | 403 | 537 | 0 | 0 | 0 |
| 1734861322 | 403 | 538 | 0 | 0 | 0 |
| 1734857740 | 403 | 539 | 0 | 0 | 0 |
| 1734855948 | 404 | 539 | 0 | 0 | 0 |
| 1734854156 | 404 | 541 | 0 | 0 | 0 |
| 1734852364 | 404 | 541 | 0 | 0 | 0 |
| 1734850574 | 404 | 542 | 0 | 0 | 0 |
| 1734848783 | 404 | 544 | 0 | 0 | 0 |
| 1734846991 | 404 | 545 | 0 | 0 | 0 |
| 1734845200 | 404 | 546 | 0 | 0 | 0 |
| 1734843408 | 405 | 547 | 0 | 0 | 0 |
| 1734841617 | 405 | 549 | 0 | 0 | 0 |
| 1734839827 | 405 | 549 | 0 | 0 | 0 |
| 1734838036 | 405 | 550 | 0 | 0 | 0 |
| 1734836245 | 406 | 550 | 0 | 0 | 0 |
| 1734834454 | 406 | 550 | 0 | 0 | 0 |
| 1734832662 | 406 | 550 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)