This is the latest recevied telemetry packets stored in our database for station/object EA4SG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734943770 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1734942870 | 4.74 VDC | 0 | 0 | 0 | 0 |
| 1734941970 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1734941070 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1734940170 | 4.52 VDC | 0 | 0 | 0 | 0 |
| 1734939270 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1734938370 | 4.49 VDC | 0 | 0 | 0 | 0 |
| 1734937469 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1734936569 | 4.47 VDC | 0 | 0 | 0 | 0 |
| 1734935669 | 4.9 VDC | 0 | 0 | 0 | 0 |
| 1734934769 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1734933869 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1734932969 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1734932069 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1734931169 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1734930269 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1734929369 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1734928468 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1734927568 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1734926668 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1734925768 | 4.63 VDC | 0 | 0 | 0 | 0 |
| 1734924868 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1734923968 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1734923068 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1734922168 | 4.75 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)