This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734914279 | 10.37 | 280.45 | 413 | 612 | 0 |
| 1734913575 | 10.34 | 283.09 | 419 | 618 | 0 |
| 1734912479 | 10.37 | 289.24 | 419 | 623 | 0 |
| 1734911776 | 10.37 | 293.63 | 429 | 628 | 0 |
| 1734910680 | 10.34 | 298.91 | 429 | 640 | 0 |
| 1734909975 | 10.37 | 303.3 | 429 | 646 | 0 |
| 1734908881 | 10.34 | 306.82 | 429 | 656 | 0 |
| 1734908175 | 9.93 | 308.58 | 435 | 661 | 0 |
| 1734907083 | 10.34 | 305.06 | 429 | 659 | 0 |
| 1734906375 | 10.37 | 303.3 | 429 | 656 | 0 |
| 1734905282 | 10.37 | 299.79 | 429 | 654 | 0 |
| 1734904575 | 10.37 | 299.79 | 435 | 652 | 0 |
| 1734903483 | 10.37 | 299.79 | 429 | 653 | 0 |
| 1734902775 | 10.37 | 298.91 | 429 | 655 | 0 |
| 1734901684 | 10.37 | 294.51 | 429 | 652 | 0 |
| 1734900975 | 10.37 | 289.24 | 424 | 647 | 0 |
| 1734899885 | 10.37 | 281.33 | 419 | 638 | 0 |
| 1734899174 | 10.37 | 275.17 | 408 | 632 | 0 |
| 1734898086 | 10.37 | 269.9 | 408 | 620 | 0 |
| 1734897375 | 10.4 | 264.63 | 408 | 606 | 0 |
| 1734896289 | 10.37 | 256.72 | 408 | 606 | 0 |
| 1734895574 | 10.34 | 252.32 | 397 | 601 | 0 |
| 1734894489 | 10.37 | 246.17 | 397 | 590 | 0 |
| 1734893775 | 10.34 | 240.89 | 392 | 583 | 0 |
| 1734892689 | 10.34 | 231.22 | 392 | 574 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)