This is the latest recevied telemetry packets stored in our database for station/object W2GMD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
01/11/2025 6:13:48 PM+00:00 | 430 | 611 | 0 | 0 | 0 |
01/11/2025 6:09:44 PM+00:00 | 429 | 610 | 0 | 0 | 0 |
01/11/2025 6:07:52 PM+00:00 | 427 | 610 | 0 | 0 | 0 |
01/11/2025 6:07:31 PM+00:00 | 428 | 611 | 0 | 0 | 0 |
01/11/2025 6:06:33 PM+00:00 | 427 | 610 | 0 | 0 | 0 |
01/11/2025 6:05:32 PM+00:00 | 427 | 610 | 0 | 0 | 0 |
01/11/2025 5:46:35 PM+00:00 | 429 | 611 | 0 | 0 | 0 |
01/11/2025 5:46:27 PM+00:00 | 429 | 611 | 0 | 0 | 0 |
01/11/2025 5:44:41 PM+00:00 | 428 | 610 | 0 | 0 | 0 |
01/11/2025 5:44:31 PM+00:00 | 429 | 610 | 0 | 0 | 0 |
01/11/2025 5:43:21 PM+00:00 | 428 | 610 | 0 | 0 | 0 |
01/11/2025 5:37:08 PM+00:00 | 426 | 610 | 0 | 0 | 0 |
01/11/2025 5:12:49 PM+00:00 | 429 | 611 | 0 | 0 | 0 |
01/11/2025 5:10:07 PM+00:00 | 429 | 611 | 0 | 0 | 0 |
01/11/2025 5:08:22 PM+00:00 | 429 | 610 | 0 | 0 | 0 |
01/11/2025 5:05:47 PM+00:00 | 427 | 611 | 0 | 0 | 0 |
01/11/2025 4:58:44 PM+00:00 | 428 | 608 | 0 | 0 | 0 |
01/11/2025 4:58:11 PM+00:00 | 428 | 607 | 0 | 0 | 0 |
01/11/2025 4:57:53 PM+00:00 | 428 | 607 | 0 | 0 | 0 |
01/11/2025 4:54:38 PM+00:00 | 426 | 608 | 0 | 0 | 0 |
01/11/2025 4:50:19 PM+00:00 | 423 | 604 | 0 | 0 | 0 |
01/11/2025 4:50:08 PM+00:00 | 423 | 604 | 0 | 0 | 0 |
01/11/2025 4:48:48 PM+00:00 | 422 | 603 | 0 | 0 | 0 |
01/11/2025 4:46:54 PM+00:00 | 421 | 601 | 0 | 0 | 0 |
01/11/2025 4:41:23 PM+00:00 | 415 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)