This is the latest recevied telemetry packets stored in our database for station/object AC7WU-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734888747 | 463 | 607 | 0 | 0 | 0 |
| 1734888675 | 467 | 606 | 0 | 0 | 0 |
| 1734888510 | 467 | 603 | 0 | 0 | 0 |
| 1734888297 | 465 | 600 | 0 | 0 | 0 |
| 1734888290 | 466 | 600 | 0 | 0 | 0 |
| 1734888264 | 464 | 599 | 0 | 0 | 0 |
| 1734888207 | 464 | 598 | 0 | 0 | 0 |
| 1734888200 | 467 | 599 | 0 | 0 | 0 |
| 1734888152 | 465 | 597 | 0 | 0 | 0 |
| 1734888059 | 467 | 594 | 0 | 0 | 0 |
| 1734888054 | 461 | 593 | 0 | 0 | 0 |
| 1734888005 | 462 | 592 | 0 | 0 | 0 |
| 1734887919 | 464 | 589 | 0 | 0 | 0 |
| 1734887786 | 462 | 584 | 0 | 0 | 0 |
| 1734887740 | 458 | 582 | 0 | 0 | 0 |
| 1734887718 | 457 | 581 | 0 | 0 | 0 |
| 1734887663 | 453 | 577 | 0 | 0 | 0 |
| 1734887642 | 457 | 577 | 0 | 0 | 0 |
| 1734884085 | 458 | 588 | 0 | 0 | 0 |
| 1734884027 | 458 | 586 | 0 | 0 | 0 |
| 1734883987 | 456 | 584 | 0 | 0 | 0 |
| 1734883976 | 452 | 583 | 0 | 0 | 0 |
| 1734883958 | 453 | 582 | 0 | 0 | 0 |
| 1734883924 | 454 | 581 | 0 | 0 | 0 |
| 1734881743 | 462 | 604 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)