This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734917996 | 2624 | 2300 | 2495 | 0 | 0 |
| 1734917106 | 2622 | 2297 | 2501 | 0 | 0 |
| 1734916386 | 2622 | 2294 | 2498 | 0 | 0 |
| 1734915606 | 2619 | 2291 | 2498 | 0 | 0 |
| 1734914771 | 2616 | 2288 | 2498 | 0 | 0 |
| 1734913982 | 2613 | 2288 | 2495 | 0 | 0 |
| 1734913226 | 2613 | 2285 | 2495 | 0 | 0 |
| 1734912346 | 2610 | 2282 | 2495 | 0 | 0 |
| 1734911556 | 2607 | 2279 | 2489 | 0 | 0 |
| 1734910701 | 2604 | 2279 | 2492 | 0 | 0 |
| 1734909871 | 2601 | 2277 | 2492 | 0 | 0 |
| 1734909036 | 2601 | 2274 | 2492 | 0 | 0 |
| 1734908306 | 2599 | 2271 | 2492 | 0 | 0 |
| 1734907411 | 2596 | 2271 | 2489 | 0 | 0 |
| 1734906594 | 2593 | 2265 | 2489 | 0 | 0 |
| 1734905716 | 2590 | 2265 | 2484 | 0 | 0 |
| 1734904937 | 2590 | 2262 | 2486 | 0 | 0 |
| 1734904141 | 2587 | 2259 | 2481 | 0 | 0 |
| 1734903386 | 2584 | 2259 | 2481 | 0 | 0 |
| 1734902511 | 2581 | 2256 | 2489 | 0 | 0 |
| 1734901626 | 2581 | 2254 | 2472 | 0 | 0 |
| 1734900741 | 2578 | 2254 | 2478 | 0 | 0 |
| 1734899997 | 2576 | 2251 | 2475 | 0 | 0 |
| 1734899236 | 2576 | 2248 | 2478 | 0 | 0 |
| 1734898466 | 2573 | 2245 | 2484 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)