This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734897298 | 500 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1734897236 | 500 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1734897223 | 501 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1734897172 | 504 Volts | 563 Deg.F | 0 | 0 | 0 |
| 1734896992 | 501 Volts | 558 Deg.F | 0 | 0 | 0 |
| 1734892624 | 502 Volts | 550 Deg.F | 0 | 0 | 0 |
| 1734892534 | 504 Volts | 548 Deg.F | 0 | 0 | 0 |
| 1734892444 | 502 Volts | 546 Deg.F | 0 | 0 | 0 |
| 1734892270 | 505 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1734892264 | 506 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1734892191 | 501 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1734892178 | 504 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1734891331 | 446 Volts | 543 Deg.F | 0 | 0 | 0 |
| 1734890433 | 490 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1734889535 | 451 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1734888636 | 445 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1734887738 | 442 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1734886840 | 446 Volts | 541 Deg.F | 0 | 0 | 0 |
| 1734885942 | 515 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1734885043 | 462 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1734884145 | 447 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1734883245 | 447 Volts | 539 Deg.F | 0 | 0 | 0 |
| 1734882346 | 441 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1734881447 | 443 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1734880548 | 448 Volts | 538 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)