This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1735912003 | 3.82 Volt | 0 ma | -16.3 C | 96340 Pa | 83 % |
| 1735911646 | 3.81 Volt | 0 ma | -16.5 C | 96340 Pa | 83 % |
| 1735910803 | 3.8 Volt | 0 ma | -16.8 C | 96340 Pa | 84 % |
| 1735909840 | 3.8 Volt | 0 ma | -16.9 C | 96360 Pa | 84 % |
| 1735909603 | 3.8 Volt | 0 ma | -16.9 C | 96380 Pa | 84 % |
| 1735908403 | 3.8 Volt | 0 ma | -17 C | 96380 Pa | 84 % |
| 1735908039 | 3.8 Volt | 0 ma | -17 C | 96380 Pa | 84 % |
| 1735907202 | 3.8 Volt | 0 ma | -17.1 C | 96380 Pa | 84 % |
| 1735906235 | 3.8 Volt | 0 ma | -17.2 C | 96400 Pa | 84 % |
| 1735906002 | 3.8 Volt | 0 ma | -17.2 C | 96400 Pa | 84 % |
| 1735904802 | 3.8 Volt | 0 ma | -16.9 C | 96380 Pa | 84 % |
| 1735904429 | 3.8 Volt | 0 ma | -16.7 C | 96400 Pa | 84 % |
| 1735903602 | 3.8 Volt | 0 ma | -16.5 C | 96400 Pa | 84 % |
| 1735902624 | 3.81 Volt | 0 ma | -16.2 C | 96420 Pa | 84 % |
| 1735902396 | 3.8 Volt | 0 ma | -16.2 C | 96420 Pa | 84 % |
| 1735901193 | 3.81 Volt | 0 ma | -16.1 C | 96400 Pa | 84 % |
| 1735900820 | 3.81 Volt | 0 ma | -16.1 C | 96400 Pa | 84 % |
| 1735900003 | 3.81 Volt | 0 ma | -16.2 C | 96380 Pa | 84 % |
| 1735899017 | 3.81 Volt | 0 ma | -16.2 C | 96400 Pa | 85 % |
| 1735898803 | 3.81 Volt | 0 ma | -16.2 C | 96400 Pa | 84 % |
| 1735897593 | 3.81 Volt | 0 ma | -16.3 C | 96440 Pa | 84 % |
| 1735897213 | 3.8 Volt | 0 ma | -16.3 C | 96440 Pa | 84 % |
| 1735896393 | 3.81 Volt | 0 ma | -16.3 C | 96460 Pa | 84 % |
| 1735895408 | 3.81 Volt | 0 ma | -16.3 C | 96480 Pa | 84 % |
| 1735895193 | 3.81 Volt | 0 ma | -16.4 C | 96480 Pa | 84 % |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)