This is the latest recevied telemetry packets stored in our database for station/object AE6LA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735928102 | 450 | 614 | 0 | 0 | 0 |
| 1735928085 | 455 | 613 | 0 | 0 | 0 |
| 1735927990 | 457 | 610 | 0 | 0 | 0 |
| 1735927986 | 457 | 610 | 0 | 0 | 0 |
| 1735927973 | 454 | 610 | 0 | 0 | 0 |
| 1735927952 | 455 | 609 | 0 | 0 | 0 |
| 1735927927 | 457 | 609 | 0 | 0 | 0 |
| 1735927922 | 456 | 608 | 0 | 0 | 0 |
| 1735927890 | 455 | 608 | 0 | 0 | 0 |
| 1735927782 | 453 | 604 | 0 | 0 | 0 |
| 1735927777 | 452 | 604 | 0 | 0 | 0 |
| 1735927771 | 454 | 603 | 0 | 0 | 0 |
| 1735927747 | 456 | 603 | 0 | 0 | 0 |
| 1735927688 | 452 | 600 | 0 | 0 | 0 |
| 1735927655 | 445 | 600 | 0 | 0 | 0 |
| 1735927632 | 443 | 599 | 0 | 0 | 0 |
| 1735927627 | 438 | 599 | 0 | 0 | 0 |
| 1735927610 | 442 | 599 | 0 | 0 | 0 |
| 1735925813 | 442 | 606 | 0 | 0 | 0 |
| 1735925766 | 445 | 605 | 0 | 0 | 0 |
| 1735925759 | 447 | 604 | 0 | 0 | 0 |
| 1735925752 | 448 | 604 | 0 | 0 | 0 |
| 1735925736 | 452 | 604 | 0 | 0 | 0 |
| 1735925723 | 450 | 604 | 0 | 0 | 0 |
| 1735925713 | 447 | 604 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)