This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734874878 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1734873678 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1734872478 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1734871278 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1734870078 | 12.98 VDC | 0 | 0 | 0 | 0 |
| 1734868877 | 13.18 VDC | 0 | 0 | 0 | 0 |
| 1734867677 | 13.02 VDC | 0 | 0 | 0 | 0 |
| 1734866477 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1734861457 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1734860257 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1734859057 | 12.94 VDC | 0 | 0 | 0 | 0 |
| 1734857860 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1734856660 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1734855460 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1734854260 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1734853060 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1734851860 | 13.04 VDC | 0 | 0 | 0 | 0 |
| 1734850660 | 13.04 VDC | 0 | 0 | 0 | 0 |
| 1734849459 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1734848260 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1734847060 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1734845860 | 12.06 VDC | 0 | 0 | 0 | 0 |
| 1734844659 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1734843460 | 11.86 VDC | 0 | 0 | 0 | 0 |
| 1734842259 | 12.08 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)