This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734896749 | 13.6 Volts | 60.41 Deg.F | 0 | 0 | 0 |
| 1734894957 | 13.83 Volts | 58.65 Deg.F | 0 | 0 | 0 |
| 1734891372 | 13.83 Volts | 58.65 Deg.F | 0 | 0 | 0 |
| 1734889579 | 13.62 Volts | 57.77 Deg.F | 0 | 0 | 0 |
| 1734885994 | 13.51 Volts | 57.77 Deg.F | 0 | 0 | 0 |
| 1734884201 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734882409 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734880616 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734878824 | 13.54 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734875241 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734871654 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734869861 | 13.51 Volts | 56.01 Deg.F | 0 | 0 | 0 |
| 1734868068 | 13.51 Volts | 56.01 Deg.F | 0 | 0 | 0 |
| 1734862690 | 13.51 Volts | 56.01 Deg.F | 0 | 0 | 0 |
| 1734851934 | 13.54 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734850141 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734848348 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734846555 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734844762 | 13.51 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1734841177 | 13.51 Volts | 57.77 Deg.F | 0 | 0 | 0 |
| 1734839384 | 13.51 Volts | 57.77 Deg.F | 0 | 0 | 0 |
| 1734834009 | 13.51 Volts | 58.65 Deg.F | 0 | 0 | 0 |
| 1734832216 | 13.51 Volts | 58.65 Deg.F | 0 | 0 | 0 |
| 1734830423 | 13.51 Volts | 59.53 Deg.F | 0 | 0 | 0 |
| 1734828631 | 13.51 Volts | 59.53 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)