This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735905304 | 1391 | 63 | 32.7 | 53.9 | 0 |
| 1735904400 | 1390 | 63.4 | 33.8 | 53.9 | 0 |
| 1735903502 | 1391 | 63.8 | 34.3 | 54.5 | 0 |
| 1735902601 | 1390 | 64.1 | 34.3 | 55 | 0 |
| 1735901702 | 1390 | 64.4 | 34.9 | 55.3 | 0 |
| 1735900800 | 1390 | 64.4 | 34.3 | 55.4 | 0 |
| 1735899902 | 1391 | 64.7 | 34.3 | 55.6 | 0 |
| 1735899001 | 1392 | 65 | 34.3 | 56 | 0 |
| 1735898102 | 1391 | 65.2 | 34.3 | 56.1 | 0 |
| 1735897200 | 1391 | 65.6 | 35.4 | 56.3 | 0 |
| 1735896304 | 1390 | 66 | 35.4 | 56.9 | 0 |
| 1735895401 | 1390 | 66.2 | 34.9 | 57.1 | 0 |
| 1735894503 | 1390 | 66.3 | 35.4 | 57.3 | 0 |
| 1735893600 | 1391 | 66.3 | 35.9 | 57.6 | 0 |
| 1735892702 | 1390 | 66.2 | 35.4 | 57.6 | 0 |
| 1735891801 | 1391 | 66.3 | 35.9 | 57.5 | 0 |
| 1735890902 | 1391 | 66 | 35.9 | 57.3 | 0 |
| 1735890000 | 1391 | 65.8 | 35.4 | 57.1 | 0 |
| 1735889102 | 1391 | 65.3 | 34.9 | 56.8 | 0 |
| 1735888202 | 1390 | 64.6 | 34.9 | 56.2 | 0 |
| 1735887303 | 1390 | 64.2 | 34.3 | 55.4 | 0 |
| 1735886401 | 1390 | 63.7 | 34.3 | 54.7 | 0 |
| 1735885503 | 1392 | 63.7 | 34.9 | 54.2 | 0 |
| 1735884602 | 1390 | 64.1 | 34.3 | 54.3 | 0 |
| 1735883703 | 1389 | 65 | 34.9 | 55.1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)