Easy APRS

My position About ☰

reset

VK2HFF-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HFF-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	CoreTemp*	BattV*	Current*
1736370076	18 Deg.C	46 Deg.C	13.8 V	214 mA
1736368277	17 Deg.C	43 Deg.C	13.8 V	215 mA
1736366477	16 Deg.C	43 Deg.C	13.8 V	204 mA
1736364678	16 Deg.C	44 Deg.C	13.8 V	204 mA
1736362877	16 Deg.C	43 Deg.C	13.8 V	205 mA
1736361077	16 Deg.C	44 Deg.C	13.8 V	216 mA
1736359278	17 Deg.C	43 Deg.C	13.8 V	204 mA
1736357477	17 Deg.C	44 Deg.C	13.8 V	212 mA
1736355678	17 Deg.C	44 Deg.C	13.7 V	240 mA
1736353877	17 Deg.C	44 Deg.C	13.8 V	204 mA
1736352076	18 Deg.C	45 Deg.C	13.8 V	208 mA
1736350277	18 Deg.C	45 Deg.C	13.8 V	212 mA
1736348478	18 Deg.C	45 Deg.C	13.8 V	204 mA
1736347857	18 Deg.C	46 Deg.C	13.8 V	211 mA
1736346057	18 Deg.C	45 Deg.C	13.8 V	204 mA
1736344257	18 Deg.C	46 Deg.C	13.8 V	208 mA
1736342457	18 Deg.C	46 Deg.C	13.9 V	210 mA
1736340657	19 Deg.C	46 Deg.C	13.8 V	212 mA
1736338857	19 Deg.C	47 Deg.C	13.9 V	205 mA
1736337057	19 Deg.C	45 Deg.C	13.8 V	212 mA
1736335257	19 Deg.C	48 Deg.C	13.9 V	205 mA
1736333457	19 Deg.C	46 Deg.C	13.9 V	208 mA
1736331658	19 Deg.C	46 Deg.C	13.8 V	229 mA
1736329859	19 Deg.C	48 Deg.C	13.8 V	219 mA
1736328057	20 Deg.C	46 Deg.C	13.8 V	208 mA

*Used Equation Coefficients:

Temp: 0, 1, 0

CoreTemp: 0, 1, 0

Fan: 0, 1, 0

BattV: 0, 0.1, 0

Current: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)