This is the latest recevied telemetry packets stored in our database for station/object VE7XAK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734896315 | 14.05 Volts | 30.03 Deg.C | 0 | 0 | 0 |
| 1734896189 | 14.17 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1734896169 | 14.2 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1734896145 | 14.23 Volts | 26.61 Deg.C | 0 | 0 | 0 |
| 1734896098 | 14.26 Volts | 26.12 Deg.C | 0 | 0 | 0 |
| 1734895412 | 14.17 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1734895400 | 14.17 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1734895318 | 14.11 Volts | 26.61 Deg.C | 0 | 0 | 0 |
| 1734895278 | 14.17 Volts | 23.67 Deg.C | 0 | 0 | 0 |
| 1734895233 | 14.14 Volts | 22.7 Deg.C | 0 | 0 | 0 |
| 1734895208 | 14.17 Volts | 22.7 Deg.C | 0 | 0 | 0 |
| 1734895168 | 14.11 Volts | 20.74 Deg.C | 0 | 0 | 0 |
| 1734828796 | 14.29 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1734828577 | 14.17 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1734828499 | 14.11 Volts | 25.63 Deg.C | 0 | 0 | 0 |
| 1734828304 | 14.17 Volts | 22.7 Deg.C | 0 | 0 | 0 |
| 1734828276 | 14.17 Volts | 22.21 Deg.C | 0 | 0 | 0 |
| 1734823204 | 14.08 Volts | 21.72 Deg.C | 0 | 0 | 0 |
| 1734818209 | 12.08 Volts | 26.61 Deg.C | 0 | 0 | 0 |
| 1734818169 | 12.11 Volts | 26.12 Deg.C | 0 | 0 | 0 |
| 1734818003 | 12.11 Volts | 21.23 Deg.C | 0 | 0 | 0 |
| 1734817962 | 12.05 Volts | 20.25 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0299, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)