This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734875180 | 12 | 845 | 415 | 52 | 0 |
| 1734872179 | 12 | 821 | 414 | 52 | 0 |
| 1734872033 | 12 | 815 | 414 | 51 | 0 |
| 1734869878 | 12 | 807 | 415 | 51 | 0 |
| 1734866877 | 12 | 808 | 415 | 54 | 0 |
| 1734863877 | 12 | 810 | 416 | 52 | 0 |
| 1734860873 | 12 | 815 | 416 | 52 | 0 |
| 1734857873 | 12 | 822 | 415 | 51 | 0 |
| 1734854873 | 12 | 829 | 415 | 52 | 0 |
| 1734851872 | 12 | 838 | 415 | 52 | 0 |
| 1734848868 | 12 | 846 | 415 | 51 | 0 |
| 1734845868 | 12 | 855 | 415 | 53 | 0 |
| 1734842868 | 12 | 863 | 416 | 52 | 0 |
| 1734839867 | 12 | 872 | 415 | 52 | 0 |
| 1734836867 | 11 | 883 | 415 | 51 | 0 |
| 1734833868 | 12 | 896 | 414 | 50 | 0 |
| 1734830867 | 12 | 913 | 415 | 51 | 0 |
| 1734827866 | 12 | 917 | 415 | 51 | 0 |
| 1734824866 | 12 | 927 | 414 | 52 | 0 |
| 1734821865 | 12 | 935 | 415 | 51 | 0 |
| 1734818864 | 12 | 930 | 415 | 52 | 0 |
| 1734815865 | 12 | 918 | 415 | 51 | 0 |
| 1734812863 | 12 | 899 | 415 | 51 | 0 |
| 1734810423 | 12 | 918 | 414 | 52 | 0 |
| 1734810227 | 12 | 921 | 415 | 51 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)